Ford Focus MK2 ST225 – CP3/CP340 Software

Description

Launched in 2015 our CP3/CP340 software is our ultimate evolution of the family of ST225 software’s which we started development on back in 2005

Power figures have varied slightly between the test development cars

• BHP  343-349bhp (295-301bhp at the wheels)
• Torque  400 – 410 lb ft

The CP3/CP340 software maximises the safe limits of the engine internals/software and sensors

Boosting to 1.38 bar and revving to 7800 rpm this software requires certain mandatory hardware upgrades to have been installed to enable the software to achieve the quoted figures (See List below)

The full CP3/340 Hardware list

• Block Mod Installed
• CP ‘Progressive’ Actuator
• Bosch RS MK2 Injectors

• Autospecialists Gen 2 induction kit/Dreamscience Induction kit

• • Airtec Stage 1 intercooler
  • 3” Turbo Back Exhaust

*The CP2/CP320 software is also ‘Decat Enabled’ which means the MIL light will not come on if you install a decat exhaust and we also offer a ‘mild’ pop and bang option.

*The software rev limit is raised to 7800 rpm and is available with a ‘mild’ overrun pop and bang option. The pop and bang is activated when the engine speed exceeds 4000 rpm and the throttle lifted off and then slightly applied

*Note: For Off Road/Track Use Only (use drop menus to select)

Purchase Options 

1. CP3/CP340 workshop install –  – Once you have placed your order please contact us to book your installation slot
2. CP3/CP340 & iflash Kit (DIY install) – – Easy to use our iflash kit allows you to install your software at home

The iflash kit option includes 

1 x CP iflash Kit – allows easy software installation and removal at home

Please note when ordering this item can you add the chassis/vin number of the vehicle in the notes section

1. Kit Contents
   1. I flash OBD 2 connector
   2. USB Cable – Connects connector to laptop
   3. USB Memory Stick – Contains
   4. Iflash exe programme to load onto laptop
   5. PDF instructions
   6. Folders for saving files

1. Process Overview
   1. Install iflash program onto laptop
   2. Connect laptop to vehicle using iflash connector
   3. Follow onscreen instructions to read a copy of the vehicle’s current software
   4. Email a copy of the file to Collins Performance
   5. Collins Performance send back correct upgrade file
   6. Once you have received the upgrade file reconnect laptop to vehicle & Install upgrade file

1. Requirements – Laptop/PC running Windows operating system

1. Support
   1. Support Web page
   2. Telephone support (during working hours)

1. Notes/FAQ
   1. You can return the vehicle back to standard at any time using iflash kit
   2. You can purchase further upgrade files (ie CP1 to CP2 upghrade) which can be emailed direct to you and installed using the iflash kit
   3. The iflash connector ‘locks’ to the vehicle and can not be used with any other vehicle
   4. We update the iflash operating program every 6 months (1^st Jan/1^st June) – the updated program is available as a download from our CP web site support page