FREE UK MAINLAND SHIPPING

Search Results for: Neuester und gültiger 4A0-265 Test VCE Motoren-Dumps und 4A0-265 neueste Testfragen für die IT-Prüfungen 🔊 Suchen Sie einfach auf ⏩ www.itzert.com ⏪ nach kostenloser Download von ⮆ 4A0-265 ⮄ 🦸4A0-265 Quizfragen Und Antworten

Collins Performance Focus mk2 ST 225 Actuator

We are pleased to announce the launch of our specially developed Focus ST225 (05-11) turbo waste gate actuator, offering improved mid range and top end boost control & performance.

For over 25 years Collins Performance has been manufacturing upgraded Actuators for use on the Sierra & Escort Cosworth engines.

This new design has been specifically developed & tested for use on the Focus ST225 using our Collins Performance CP Level 3 software upgrades. However this product should also be suitable for use most other aftermarket software upgrade  – Please check with your supplier for further information.

The actuator is manufactured from HE30 aluminium with a stainless steel bracket and features a 50 mm piston and a progressive spring for superior boost control. This product is available in Blue, Silver, Red or Black finishes.

 

Mercedes C450 AMG Biturbo (2015on) – RENNtech ECU upgrade

The RENNtech ECU Upgrade is the ideal complement for the M276 engine from Mercedes in the new C 400 BiTurbo. This upgrade provides an enormous increase in performance over the entire speed range, without compromising ride comfort or everyday reliability. Their product achieved the highest increase in performance in the market, with an impressive 402bhp and 454ftlb to the crankshaft.  

 

C450 AMG (W205|M276|3.0L BiTurbo V6 4MATIC)

Standard Power: 362bhp at 5500-6000, 384ftlb at 1800-4000

Modified Power: 402bhp at 5300, 454ftlb at 3200

 

*NOTE – We would need either the ECU or the vehicle bringing to our premises in Cheshire

 

Due to some of the products coming direct from RENNtech USA please allow 7-10 days for delivery

Prices may vary in accordance to the current exchange rate, please contact us for the current confirmed price

Busy, Busy Week This Week!

A workshop full of Focus’ this week!

Starting with Russell’s Zero to Hero upgrade, standard to CP420 Level 3!

Josh’s ST225 rebuild almost complete – nice set of BC coilover dampers!

Stephen RS Mk3 in for H&R springs and Mongoose exhaust,

Chris’s ST225 for Downpipe and Lowering

and Waynes RS MK2 MR375 in for diagnostic work.

15320227_10208913431647228_2115763771_n

15301336_10208913431607227_1711674060_n

15282077_10208913437167366_190160929_n

15300565_10208913437207367_1957682355_n

15281071_10208913437247368_970782236_n

15319448_10208913440527450_2118234457_n

15310613_10208913440487449_560836778_n

#NEXTLEVEL

Mercedes C400 Biturbo (2015on) – RENNtech ECU upgrade

The RENNtech ECU Upgrade is the ideal complement for the M276 engine from Mercedes in the new C 400 BiTurbo. This upgrade provides an enormous increase in performance over the entire speed range, without compromising ride comfort or everyday reliability. Their product achieved the highest increase in performance in the market, with an impressive 397hp and 586Nm to the crankshaft.  

 

C400 (W205|M276|3.0L V6 BiTurbo 4MATIC)

Standard Power: 328bhp at 5250-6000, 354ftlb at 1600-4000

C400 (W205|M276|3.0L V6 BiTurbo 4MATIC)

Modified Power: 392bhp at 5800, 432ftlb at 3110

 

*NOTE – We would need either the ECU or the vehicle bringing to our premises in Cheshire

 

Due to some of the products coming direct from RENNtech USA please allow 7-10 days for delivery

Prices may vary in accordance to the current exchange rate, please contact us for the current confirmed price

Ford Focus MK2 ST225 – CP3/CP340 Software

Launched in 2015 our CP3/CP340 software is our ultimate evolution of the family of ST225 software’s which we started development on back in 2005

Power figures have varied slightly between the test development cars

  • BHP  343-349bhp (295-301bhp at the wheels)
  • Torque  400 – 410 lb ft

The CP3/CP340 software maximises the safe limits of the engine internals/software and sensors

Boosting to 1.38 bar and revving to 7800 rpm this software requires certain mandatory hardware upgrades to have been installed to enable the software to achieve the quoted figures (See List below)

The full CP3/340 Hardware list

  • Block Mod Installed
  • CP ‘Progressive’ Actuator
  • Bosch RS MK2 Injectors
  • Autospecialists Gen 2 induction kit/Dreamscience Induction kit
    • Airtec Stage 1 intercooler
    • 3” Turbo Back Exhaust

*The CP2/CP320 software is also ‘Decat Enabled’ which means the MIL light will not come on if you install a decat exhaust and we also offer a ‘mild’ pop and bang option.

*The software rev limit is raised to 7800 rpm and is available with a ‘mild’ overrun pop and bang option. The pop and bang is activated when the engine speed exceeds 4000 rpm and the throttle lifted off and then slightly applied

*Note: For Off Road/Track Use Only (use drop menus to select)

Purchase Options 

  1. CP3/CP340 workshop install –  – Once you have placed your order please contact us to book your installation slot
  2. CP3/CP340 & iflash Kit (DIY install) – – Easy to use our iflash kit allows you to install your software at home

The iflash kit option includes 

1 x CP iflash Kit – allows easy software installation and removal at home

Please note when ordering this item can you add the chassis/vin number of the vehicle in the notes section

  1. Kit Contents
    1. I flash OBD 2 connector
    2. USB Cable – Connects connector to laptop
    3. USB Memory Stick – Contains
    4. Iflash exe programme to load onto laptop
    5. PDF instructions
    6. Folders for saving files
  1. Process Overview
    1. Install iflash program onto laptop
    2. Connect laptop to vehicle using iflash connector
    3. Follow onscreen instructions to read a copy of the vehicle’s current software
    4. Email a copy of the file to Collins Performance
    5. Collins Performance send back correct upgrade file
    6. Once you have received the upgrade file reconnect laptop to vehicle & Install upgrade file
  1. Requirements – Laptop/PC running Windows operating system

 

  1. Support
    1. Support Web page
    2. Telephone support (during working hours)
  1. Notes/FAQ
    1. You can return the vehicle back to standard at any time using iflash kit
    2. You can purchase further upgrade files (ie CP1 to CP2 upghrade) which can be emailed direct to you and installed using the iflash kit
    3. The iflash connector ‘locks’ to the vehicle and can not be used with any other vehicle
    4. We update the iflash operating program every 6 months (1st Jan/1st June) – the updated program is available as a download from our CP web site support page

 

K&N Replacement Filter – Focus ST225

K&N’s replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. They make over 1,200 different replacement air filters for virtually every vehicle on the road. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty™ and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.

Part 33-2873 Product Specifications

Product Style: Panel Air Filter
Height: 1 in (25 mm)
Outside Length: 9.188 in (233 mm)
Outside Width: 8.063 in (205 mm)
Filter Material: Cotton Gauze
Filter Re-Oiling Amount: 1.07 oz (32 ml)
Weight: 0.93 lb (0.42 kg)
Product Box Length: 10.44 in (265 mm)
Product Box Width: 1.75 in (44 mm)
Product Box Height: 11.56 in (294 mm)